Patterned unit cells
Architected metamaterials.
A repeating geometry can give a material properties that depend strongly on its architecture. Features range from mechanical motion to acoustic and optical filtering.
Open the interactive sample →What changes physically
In one patterned elastomer experiment, compression triggered a geometric instability and a negative effective Poisson ratio. In that regime the sample narrowed transversely as it was compressed. The motion panel illustrates this kind of cooperative cell rotation.
What it could enable
Compare three research directions. Auxetic cells tune transverse deformation. Locally resonant acoustic cells can suppress transmission over selected frequency bands. A periodic polymer-opal structure can reflect a selected optical band as its spacing changes.
What a real sample must establish
The three examples have different unit cells, physical observables and length scales. The compression slider illustrates only the mechanical example. The displayed strain range supplies no measured buckling threshold or load rating for Tekton.
Two other ways architecture changes a signal
Locally resonant acoustic cell
A small resonator can move strongly relative to its host near its natural frequency. An array can reduce transmission over a band. Liu and colleagues measured an array of coated solid inclusions. Here one damped oscillator shows displacement under a harmonic force.
At a drive frequency equal to the natural frequency, the relative displacement amplitude is 4.17 for the illustrative damping ratio of 0.12.
A measured transmission spectrum across a specimen is needed to locate an acoustic stop band. Liu et al. · sonic material experiment ↗
Periodic optical structure
Reflections from periodically spaced planes can add together for particular wavelengths. Change the spacing to move the ideal first-order reflection peak.
At 180 nm spacing and an assumed effective index of 1.5, the normal-incidence estimate is 540 nm.
The simple estimate λ ≈ 2 n d assumes normal incidence and a constant effective refractive index. Actual reflectance depends on ordering, index contrast and angle. Read the polymer-opal experiment ↗
Watch and explore
Original research
Bring a material question to Theis
These samples explain published experiments and design ideas. Theis describes Tekton as a proprietary materials platform. Each proposed application needs a named sample, an appropriate control and measurements before it can become a product claim.
Prepare a project inquiry →